Birch PRP-T3 / BP-T3 - reset tiskárny

KB0017

The Birch PRP-T3 / BP-T3 printer can be reset to factory settings by holding the FEED button for 15 seconds when the printer is switched on.

1. Turn the printer off
2. Press the FEED button and keep holding
3. Turn on the printer,
4. Hold the FEED button for 15 seconds until both red lights flash.

Pressing FEED briefly while switching on will only produce a check print with settings.

The printer can be set up using the POS Printer Test V2.1 utility, or via the web interface to the default IP: 192.168.123.100

-PB-